LSI RAID 硬盘修复 storcli spinup failed 问题
分类：System 标签：Raid
WHAT
最近处理一批 LSI RAID 故障的机器，遇到硬盘 UGood 状态竟无法配置 RAID 的情况
发现 PD 物理盘的 Spin 状态是 D down 状态：
$ sudo /usr/local/sbin/storcli /c0/e0/s8 show
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.
Drive Information :
=================
--------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
--------------------------------------------------------------------------
0:8 4 UGood - 7.276 TB SATA HDD N N 512B ST8000NM0016-1U3101 D <-- Spin 状态为 D
--------------------------------------------------------------------------
使用 storcli 设置 PD Spin 状态 spinup 结果报错：
$ sudo /usr/local/sbin/storcli /c0/e0/s8 spinup
Controller = 0
Status = Failure
Description = Spin Up Drive Failed.
Detailed Status :
===============
-----------------------------------------------------------------------
Drive Status ErrCd ErrMsg
-----------------------------------------------------------------------
/c0/e0/s8 Failure 50 device state doesn't support requested command
-----------------------------------------------------------------------
HOW
使用 erase 清除一下 PD 硬盘 状态 ：
$ sudo storcli /c0/e0/s8 help|grep -w erase
storcli /cx[/ex]/sx start erase [simple| normal| thorough | standard| threepass | crypto]
storcli /cx[/ex]/sx stop erase
storcli /cx[/ex]/sx show erase
硬盘 Spin 状态从 D 变为 U ：
$ sudo storcli /c0/e0/s8 start erase simple
earse 除了擦除 PD 状态，还会擦除数据，8T 硬盘耗时还是比较久的：
$ sudo storcli /c0/e0/s8 show erase
Controller = 0
Status = Success
Description = Show Drive Erase Status Succeeded.
----------------------------------------------------
Drive-ID Progress% Status Estimated Time Left
----------------------------------------------------
/c0/e0/s8 1 In progress 9 Hours 31 Minutes
----------------------------------------------------
Spin 状态复位后，停止擦除即可：
$ sudo storcli /c0/e0/s8 stop erase
Controller = 0
Status = Success
Description = Stop Drive Erase Succeeded.
清除磁盘状态后，Spin 状态可以顺利 spinup 和 spindown 开关：
$ sudo storcli /c0/e0/s8 spindown
Controller = 0
Status = Success
Description = Spin Down Drive Succeeded.
$ sudo storcli /c0/e0/s8 show
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.
Drive Information :
=================
--------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
--------------------------------------------------------------------------
0:8 4 UGood - 7.276 TB SATA HDD N N 512B ST8000NM0016-1U3101 D
--------------------------------------------------------------------------
$ sudo storcli /c0/e0/s8 spinup
Controller = 0
Status = Success
Description = Spin Up Drive Succeeded.
$ sudo storcli /c0/e0/s8 show
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.
Drive Information :
=================
--------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
--------------------------------------------------------------------------
0:8 4 UGood - 7.276 TB SATA HDD N N 512B ST8000NM0016-1U3101 U
--------------------------------------------------------------------------
故障盘设置 offline、missing 下线后，需要设置 PD spindown ：
storcli /cx/ey/sz set offline
storcli /cx/ey/sz set missing
storcli /cx/ey/sz spindown
硬盘在 spindown 状态后是无法创建 RAID 的：
$ sudo storcli /c0/e0/s8 spindown
Controller = 0
Status = Success
Description = Spin Down Drive Succeeded.
$ sudo storcli /c0 add vd type=r0 drives=0:8
Controller = 0
Status = Failure
Description = physical disk does not have appropriate attributes
重新设为 spinup 后，UGood 硬盘就可以正常创建 RAID 了：
$ sudo storcli /c0/e0/s8 spinup
Controller = 0
Status = Success
Description = Spin Up Drive Succeeded.
$ sudo storcli /c0/e0/s8 show
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.
Drive Information :
=================
--------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
--------------------------------------------------------------------------
0:8 4 UGood - 7.276 TB SATA HDD N N 512B ST8000NM0016-1U3101 U
--------------------------------------------------------------------------
$ sudo storcli /c0 add vd type=r0 drives=0:8
Controller = 0
Status = Success
Description = Add VD Succeeded
reference
- storcli
- LSI storcli64 examples
- How do I replace a failed drive with LSI 9280 cards?
- How do I remove a failing disk from a LSI MegaRAID disk group?
| 本文标题 | LSI RAID 硬盘修复 storcli spinup failed 问题 |
|---|---|
| 原始链接 | https://lvii.github.io/system/2019-10-28-fix-lsi-raid-pd-disk-storcli-spinup-failed-problem/ |